25
4 Parameters Setting
4.1 Battery parameters
4.1.1 Supported battery types
1
Battery
Sealed(default)
Gel
Flooded
2
Lithium
battery
LiFePO4(4S/8S/15S/16S)
Li(NiCoMn)O2 (3S/6S/7S/13S/14S)
3
User
Note: If the controller supports 48V system voltage, the battery type will display LiFePO4 F15/F16, and Li(NiCoMn)O2 N13/N14.
4.1.2 Local setting
WARNING
When the default battery type is selected, the battery voltage parameters cannot be modified. To change these parameters, select the
"USE" type.
Step1:
Enter the “USE” battery type. For XDS1 module, detail operations of entering the “USE” battery type refer to the chapter 3.2. For XDS2 module, detail
operations of entering the “USE” battery type refer to the chapter 3.3.
Step2:
Under the "USE" battery type, the battery parameters that can be local set are shown in the table below:
