USB cable to charge it. If the camera is low- electricity, the red light will flash
slowly. The camera can also be charged by a charger.
2) Usually a full charge requests 3-4 hours. The red LED light turns on when
recharging while turns off when battery is full charged. Please charge it first
before using it when the camera has been standing idle for long time.
Playback video
Connect the camera to your computer via USB cable to play back video.
Setting time
1) Connect the camera to computer via USB cable
2) Insert the manual CD and establish a file named
SetTime.TXT according to the
format 2009.12.12 12:12:12
3) Then copy it to the manual CD, The time of camera will be updated when you
restart it again.
Attention
1) The system will save the video file firstly then turn off if it is low power when taking
video.
2) When taking video continually, the system will automatically generate a new
video file after each operation.
3) The time of computer recognizing the device is different according to its different
system and configuration, so please do not operate during the recognizing. If the
device can’t be recognized, please check the computer’s operation system,
device drivers, USB port and the USB cable to see if they are normal, and then
connect the camera again.
