Installation manual for wall mounting for flat screen.
EPS20EW
Note: It is recommended that this product be installed only by a professional. We do no accept
responsibility for damages caused by improper installation, assembly or use of this equipment. In
case of any doubt, please contact a professional to help you.
IMPORTANT.
•
For safety reasons, the wall or mounting surface must be able to support the combined
weight of the mounting and the screen; otherwise the structure must be reinforced.
Appropriate safety equipment and tool must be used. Failure to do so may result in
•
property damage or serious injury.
Make sure electrical wires, water pipes or gas pipes are not located between the wall.
•
Tools required for installation
•
Screwdriver cross head.
•
Electric or portable drill.
•
1/5”(5mm) drill bit + post detector (plaster wall installation)
•
2/5”(10mm) concrete drill bit (concrete installation)
Make sure all installation accessories are included with the assembly. You can find the following:
Wall Installation
(A) M6x50 Delay Bolt
(D) M4x12 Bolt
(G) Adjustable spanner
(B) Anchor
(E) M6x12 Bolt
(C) Washer M6
(F) M8x12 Bolt
Plaster Wall
Concrete Wall
Pole
Pole detector
Measuring Tape
Measuring Tape
Use a pencil to mark the holes
Use a pencil to mark the holes
Insert a concrete hole in each hole
