operating range of 15 / 7.5 m will appear closer due to the wrap-around of the modulation period. Example for 20MHz: Is the object at
a distance of 8.5m, the camera displays a distance of 1m (8.5m – 7.5m). This is obviously wrong!
4. Mechanical dimensions
Notes:
■
The distance measurement starts from the front window of the housing with distance value 0mm.
■
The base plate contains 4 pcs M3 threaded holes with a depth of 6mm for mounting. Use only these mounting points.
■
Because the base plate is also a heat sink for the illumination LEDs, it should not be covered by thermal insulating material. Free air flow
shall be provided at any time in order to avoid excessive heat of the camera. The camera temperature can be monitored by reading the
temperature with the command GET_TEMPERATURE (refer to Chapter 11.3).
© 2019 ESPROS Photonics Corporation
Characteristics subject to change without notice
7 / 39
Installation_and_Operation_Manual_TOF>cam_635-V0.21
Figure 3: Mechanical dimensions
Zero Distance
(camera lens window)
4 x M3
(6 mm deep)
Base plate
Connector
Indicator
LEDs
Cover
Illumination window
X axis
Y axis
Distance axis (spheric)