
5
Satellites
5.1
Adding new satellites
The search and storage of new satellites on the ship must be done in the harbour in calm
waters! For every satellite at least one program must be preprogrammed in the receiver to
control the satellite position of the antenna unit by means of the TV picture quality. Make
sure the preprogrammed TV station for the desired satellite is turned on at the receiver, as
the system stops at each receivable satellite. The satellite can be identified by the quality of
the TV picture.
Please proceed as follows:
1. To go to the Setup menu, press
repeatedly until the display shows
Setup
(flashing), then press
. Enter password, see chapter 3.4. If the password is correct you
are in the Setup menu with the display showing:
Tracking
.
2.
Press
repeatedly until
New Sat
appears on the display. Press
to select. For
two seconds
Search?
appears and changes to
Sat X
.
You have now the possibility to choose between
band-tracking
and
channel-tracking
.
The advantage of the channel-tracking mode is the selection of the measurement
frequency. By this method external interfering radiation can be prevented. The band-
tracking mode can achieve a better tracking result.
We recommend the channel-tracking mode. With the
key you will automatically get
into the channel-mode. By repeatedly pressing the
key you can choose the desired
stored satellite. Confirm with
.
If you chose band-tracking, please confirm
Sat X
by pressing
.
!!
New Sat
only appears in the display, if free satellite storage positions are available.
In case all storage positions are occupied, the less required ones have to be deleted first.
(see chapter 5.3).
3. If you chose
Sat X
,
ScnBand
will be shown for 2 seconds. After that, use the
key to change band between
Band1
and
Band4
to select the band in which the
satellite should be searched. Please refer to the band numbers in the following table:
Band 1
10700 MHz 11700 MHz Polarization vertical (vertical low / VL)
Band 2
10700 MHz 11700 MHz Polarization horizontal (horizontal low / HL)
Band 3
11700 MHz 12750 MHz Polarization vertical (vertical high / VH)
Band 4
11700 MHz 12750 MHz Polarization horizontal (horizontal high / HH)
Example
Astra 2
Band 3
Hotbird
Band 3
Sirius
Band 3
US
Band 2
4. Confirm with
or cancel with
.
English Page 15 / 34
Содержание Basic Line TV44
Страница 1: ...Handbuch Basic Line TV 44 TV 59 River Line TV 43 TV 58 Deutsch IV 2008...
Страница 36: ...Manual Basic Line TV 44 TV 59 River Line TV 43 TV 58 English IV 2008...
Страница 70: ...Manuale Basic Line TV 44 TV 59 River Line TV 43 TV 58 Italiano I 2009...
Страница 105: ...Manual Basic Line TV 44 TV 59 River Line TV 43 TV 58 Espa ol IV 2008...