EPA SM-Ethernet, Руководство пользователя

Страница: 11 / 133

10
SM-Ethernet User Guide
Issue: 7
2 Introduction
2.1 Features
The SM-Ethernet is a Solutions Module that can be used on the following products to
provide Ethernet slave connectivity:
• Unidrive SP
• Commander SK
• Affinity
• Digitax ST
• Mentor MP
With the exception of Commander SK, it is possible to use more than one SM-Ethernet
module or a combination of SM-Ethernet and other Solutions Modules to add additional
functionality such as extended I/O, gateway functionality, or additional PLC features.
The following list gives an overview of the functionality available within SM-Ethernet.
• Single RJ45 connectivity with support for shielded twisted pair.
• 10/100Mbs Ethernet with auto-negotiation.
• Full and half duplex operation with auto-negotiation.
• Auto crossover detection.
• TCP/IP.
• Modbus TCP/IP.
• EtherNet/IP.
• Embedded web pages for configuration.
• Event driven E-mail generation.
• SyPTPro over Ethernet.
• OPC server over Ethernet.
• CTSoft over Ethernet.
• Static IP configuration or DHCP client.
• SMTP.
• SNTP.
• Firmware updates over Ethernet using web pages.
• User defined web pages.
• Integrated security.
• 4kV impulse isolation.
• Help files integrated into the module.
• Multiple language support.
SM-Ethernet is powered from the host drive’s internal power supply and draws 280mA
from the supply.
2.1.1 Backup/auxiliary supply
Unidrive SP, Affinity and Digitax ST drives provide a method of powering up the control
circuits (and therefore any Solutions Modules installed) if the AC supply is removed, this
allows the SM-Ethernet to continue operating when the main AC supply is switched off.
For every SM-Ethernet module installed allow for an extra 280mA of supply current to
be drawn from the backup supply.