System inspection and maintenance
LEAK
COMP
®
1C
www.leakcomp.de
34
of
34
10
System inspection and maintenance
WARNING
These tests must be carried out by a qualified electrician who is competent to carry out
the tests, has experience of testing and possesses a knowledge based on the testing
of comparable systems.
For the initial test of electrical systems and stationary equipment, the requirements of
the standard DIN VDE 0100-600 "Low-voltage electrical installations – Part 6:
Verification" must be met.
For the repeat test of electrical systems and stationary equipment, the requirements of
the standard DIN VDE 0105-100 "Operation of electrical installations – Part 100:
General requirements" must be met.
Always follow the accident prevention regulations.
IMPORTANT NOTE
When used as intended, the
LEAK
COMP
®
1C
is maintenance-free.
Inspection or maintenance should only be carried out by qualified electricians.
Unless explicitly described in these operating instructions, modifications to the device
may only be carried out by EPA or persons authorised by EPA.
11
Repairs
IMPORTANT NOTE
The
LEAK
COMP
®
1C
can be damaged or destroyed if the instructions are not followed.
Repairs may only be carried out by EPA or repair centres authorised by EPA.
Unauthorised tampering can lead to property damage and will void the warranty
provided by EPA.
The housing should not be opened.
12
Disposal
IMPORTANT NOTE
The
LEAK
COMP
®
1C
is a device intended for commercial use. These devices should
not be disposed of at municipal collection points for electrical appliances. The devices
contain electronic components and must be disposed of properly. If you have any
questions, please contact us.
