1
Electronic file link
www.eliteprojector.com/MGFU/manual
P r i n t e d i n T a i w a n
www.eliteprojector.com
FBZZ-MG1Z002-01
1. The ventilation ports prevent overheating. Never block these ports located on the sides and bottom of the projector.
(See page 12) Direct obstruction, confined spaces or placing on a cluttered surface restricts airflow, and ruins the projector.
2. To reduce risk of fire or electric shock, do not expose the projector to any liquids, rain, snow or airborne moisture.
3. Do not insta
4. Do not use the projector in direct sunlight.
5.
6. Do not use the projector in areas susceptible to excessive dust and dirt.
7. Turn off the product before cleaning.
8. Disconnect the power cord if the product is not being used for a long period of time.
9. Ensure that the ambient room temperature is within 0- 40°C (32-104°F).
10. Ensure that relative humidity is 5 - 35°C (41- 95°F), 80% (Max.), non-condensing.
11. Do not drop, throw or try to bend your product.
explosion.
13. Clean only with dry cloth.
14. Only use attachments/accessori
15. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to):
Unit has been dropped.
Charger or plug has been damaged.
Liquid has been spilled on the projector.
Projector has been exposed to rain or moisture.
Something has fallen into the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please contact your
local reseller or service center before you send the unit for repair.
17. Follow all warnings and cautions in this manual and on the projector.
18. The unit should only be repaired by appropriate service personnel.
19. Projector lamps generate a lot of heat. This causes much of the projector's surface area to heat up. If the projector seems to be excessively hot,
turn it off so that it can cool down and then call customer service.
EYE SAFETY WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
To avoid retinal damage, do not stare directly or indirectly into the projector's light beam.
Rather than stand in the projector's light beam to point on the screen, use a laser pointer or pointer stick instead.
Make sure that students and other viewers observe the eye safety warnings and stay out of the direct light beam.
Use window blinds and turn down interior light sources to reduce the washout glare of ambient light.
COPYRIGHT / TRADEMARK
© Copyright 201
9
. All rights reserved.
The manufacturer reserves the right to make technical changes. The manufacturer assumes no liability for damages incurred directly or indirectly from errors,
omissions, or discrepancies between the device and this documentation.
Other brands or logos are trademarks or registered trademarks of their respective companies.
CAUTION – RISK OF BATTERY EXPLOSION IF INCORRECT TYPE IS USED
MAKE SURE TO PROPERLY DISCARD USED BATTERIES ACCORDING TO
LOCAL REGULATIONS
