background image

18

 

 

 
 

4.4 Battery removal and installation 

Park the truck securely(See 3.2.4 Parking the truck securely  Page 15 ) and turn off 

the power before removal and installation battery.

 

 

Battery removal and installation steps:

 

a: Lift the forks by moving the control shaft (1) up and down to the highest.And Rotate 
the control shaft (1) a few degrees to the left or right.

 

b

Remove two screws(2), take out the cover(3).

 

c: Remove wire harness, battery cable 

Take out the battery(4).

 

 

2

 

•  lnstallation is in the reverse order of operations, pay attention on battery install 

position and cable connection. Make sure the welf place cables to avoid be damaged 
when you removal and installation battery.

 

 
 
 
 
 

 

4.58 

attery maintenance

 

Do 

not overuse battery:

 

• lf you use up the energy of battery till the Pallet immovability, you wilt shorten its 
working hours.

 

• Shower 

tor 

battery appears need for charge, please charge it quickly.

 

 

Battery maintenance:

 

The battery cell covers must be kept dry and clean

The terminals and cable shoes 

must be clean,  secure and have a light coating of dielectric grease.Batteries with non

 

Warning 

!

 

Well place cables to avoid be 

damaged when you removal 

and

 

 

Содержание EPT18- EHJ





































Отзывы: