1)
CONCRETE
SLAB
AND
PAVER
CONSTRUCTION:
When building your fire pit
on top of a concrete slab or paver surface, it is
recommended that a layer of geotextile or
landscaping weed barrier cloth be laid in the bottom
of the pit and turned up the inside of the block 4”.
The bottom of the fire pit cavity should then be
filled with clean sand to a depth of 4”. This will help
prevent ash particles from washing out of the bottom
of the fire pit and staining the surrounding surface.
Continue to page 6.
| 3 |
1) Establish location of Fire Pit.
2) Mark out the exterior dimension.
3) Cut out pavers and lay first course.
4) Install weed barrier cloth.
5) Stagger Joints
6) Build to desired height (not to exceed 7
courses).
7) Place copper bowl and grate.
8) Cap the Fire Pit wall.
8) Add spark screen and enjoy!
PAVERS OR CONCRETE SLAB/INSET INSTALLATION
| FIRE PIT INSTALLATION GUIDELINES