eove EO-BAT9, Руководство пользователя

Страница: 18 / 21

- INTERFERENCE MAY OCCUR IN THE VICINITY OF EQUIPMENT MARKED WITH THE
FOLLOWING SYMBOL :
- EO-BAT9 IS DESIGNED FOR USE IN
BELOW. THOSE USING THE DEVICE SHOULD ENSURE THAT THE
ENVIRONMENT.
Emissions test
RF emissions CISPR 11
Harmonic Emissions
IEC 61000-3-
Voltage Fluctuations/Flicker
Emissions
IEC 61000-3-
Immunity Test
Electrostatic discharge (ESD)
IEC 61000-4-
Electrical fast
transient/burst
IEC 61000-4-
Surge
IEC 61000-4-
Voltage dips, short
interruptions and voltage
variations on power supply
input lines
IEC 61000-4-
Power frequency (50/60 Hz)
magnetic field
IEC 61000-4-
Conducted RF
IEC 61000-4-
Radiated RF*
IEC 61000-4-
*Recommended separation distance
d = 1.17
√
P
d = 0.35
√
P 80 MHz to 800 MHz
d = 0.70
√
P 800 MHz to 2.5 GHz
Where (P) is the maximum output power
transmitter manufacturer and d is the recommended separation distance in meters (m). Field
strengths from fixed RF transmitters, as determined by an electromagnetic site survey, should be less
than the compliance level in each frequency range.
Recommended distance between device and portable and mobile RF equipment.
EO
INTERFERENCE MAY OCCUR IN THE VICINITY OF EQUIPMENT MARKED WITH THE
IS DESIGNED FOR USE IN THE ELECTROMAGNETIC ENVIRONMENT DESCRIBED
BELOW. THOSE USING THE DEVICE SHOULD ENSURE THAT THE EO-BAT9
Emissions test Level of compliance
RF emissions CISPR 11 Class A
Harmonic Emissions
-2
Class A
Fluctuations/Flicker
-3
Complying
Immunity Test Level of compliance
Electrostatic discharge (ESD)
-2
6 kV contact
8 kV air
Electrical fast
transient/burst
-4
1 kV
-5
1 kV differential mode
2 kV common mode
Voltage dips, short
interruptions and voltage
variations on power supply
-11
<5% Ut for 0.5 cycle
40% Ut for 5 cycles
70% Ut for 25 cycles
<5% Ut for 5 sec
Power frequency (50/60 Hz)
magnetic field
-8
3 A/m
Conducted RF
-6
3 Vrms
150 kHz to 80 MHz
Radiated RF*
-3
10 V/m
80 MHz to 2.5 GHz
*Recommended separation distance
P 80 MHz to 800 MHz
P 800 MHz to 2.5 GHz
Where (P) is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer and d is the recommended separation distance in meters (m). Field
strengths from fixed RF transmitters, as determined by an electromagnetic site survey, should be less
he compliance level in each frequency range.
Recommended distance between device and portable and mobile RF equipment.
EO-BAT9 - User Guide
18
INTERFERENCE MAY OCCUR IN THE VICINITY OF EQUIPMENT MARKED WITH THE
THE ELECTROMAGNETIC ENVIRONMENT DESCRIBED
IS USED IN SUCH AN
rating of the transmitter in watts (W) according to the
transmitter manufacturer and d is the recommended separation distance in meters (m). Field
strengths from fixed RF transmitters, as determined by an electromagnetic site survey, should be less
Recommended distance between device and portable and mobile RF equipment.