EOT ET-3500AF, Руководство пользователя

Страница: 4 / 7

Electro-Optics Technology, Inc.
3340 Parkland Ct. Traverse City, MI 49686 USA
(231)935-4044 ׀ (800)697-6782 ׀sales@eotech.com ׀ www.eotech.com
Page 4 of 7
C. Increasing the power incident on the detector does not result in a higher voltage signal on the
oscilloscope:
1. The detector is probably saturated. You should lower the power incident on the detector to a
level below the saturation point.
IV. Drawings: Amplified High Speed Fiber Photodetectors
A. ET-3500AF, ET-4000AF, ET-5000AF Dimensions:
V. Specifications: Amplified High Speed Fiber Photodetectors
Part No. (Model)
120-10064-0001
a
(ET-3500AF)
120-10077-0001
a
(ET-4000AF)
120-10116-0001
a
(ET-5000AF)
Detector Material InGaAs GaAs InGaAs
Rise Time/Fall Time
35ps/35ps 35ps/35ps 35ps/35ps
Conversion Gain 1620V/W at 1310nm 970V/W at 850nm 2350V/W at 2000nm
Power Supply 5VDC 5VDC 5VDC
Bandwidth
20kHz-10GHz 20kHz-10GHz 20kHz-10GHz
Active Area Diameter 32µm 60µm 40µm
Noise Equivalent Power 30pW/√Hz at 1310nm 50pW/√Hz at 850nm 25pW/√Hz at 2000nm
DC Monitor Output
1mV/µA 1mV/µA 1mV/µA
Maximum Linear Rating 450mVp-p 450mVp-p 450mVp-p
Mounting (Tapped Holes) 8-32 or M4 8-32 or M4 8-32 or M4
Output Connector
SMA SMA SMA
Fiber Optic Connection FC/UPC FC/UPC FC/UPC
a
Not suitable for CW applications.