background image

14

WARNING AND SAFETY SIGN

◇     Follow  instruction  described  in  plate  of  battery,operating  instruction  and  instruction  of  vehicles  and 

ships.

Wear guard-glasses.

Keep children from touching electrolyte and battery.

Explosive Hazard Easy-explosive mixture come to escape during charge,So fire electric spark,

uncovered  bulb  and  fireworks  are  strictly  inhibited,When  connecting  wire-circuit,electric  spark  and 

short-circuit must be avoided.

Hazard of strong corrosion Electrolyte is strongly corrosive,So please wear protective clothes

and guard glasses,Do not tilt the storage battery otherwise acid liquid will overflow.

◇  Emergency Cure when the acid liquid spatters in the eyes,wash it with a large quantity of clean water at 

once,then  see  a  doctor,Acid  liquid  on  skin  and  clothes  shall  be  washed  with  a  large  quantity  of  clean 

water as well,If acid liquid is swallowed,please see a doctor at once.

Warning:

·Do not put the unprotected storage battery in the sun.

·Because discharged storage battery may be frozen,please store it in frostless conditions.

Handling:

·Store discarded battery in stipulated site.

·Follow rules of transportation(GGVS)during transporting.

·Do not mix discarded battery with daily rubbish.

Содержание ETAD35










Отзывы: