EOS Vitae Protect Compact, Инструкция по установке и эксплуатации

Страница: 23 / 38

23
EN
First make a rectangular cut-out in the cabin wall
as shown in the Fig. 5.
For the foot-zone radiator the cut-out should
be horizontal.
The wall above the radiator should be hollow
inside to let the hot air rise.
Draw the connection cable from the radiator up
to the ceiling through the duct in the cabin wall.
Pay attention that the cable connection of the
radiator must be oriented downwards
For details and safety gaps please refer to the
illustrations shown in Fig. 4, 5, 8 and 9.
Installation example and gaps:
Front view
Fig. 5
Dimensions in mm
200
795
167
785
~60
ATTENTION!
Not suitable for horizontal installation
and installation in the cabin ceiling.
Risk of fire due to heat congestion.
Wall cut-out
with rear ventilation
At first insert the rear side panel into the cut-
out in the wall (fig. 6). Then insert the IR heater
into this rear side panel, so that it’s mounting
holes get lined up with those of the rear side
panel. Then screw the IR heater with the rear
side panel through these holes to the cabin
wall (fig. 7).
As the last step mount the front safety cover
grill with two screws at the top and at the bot-
tom to the IR heater.
Fig
. 7
Fig
. 6