SteamAttrac - Installation and Operating Instructions
17
Identification
Excess pressure
The sealed relief valve has a factory setting of 0.8 bar (800 hPa). Any excess
pressure in the vaporiser tank can escape through a drain pipe. This pipe
must be connected to a drain.
2.5.1
Scope of delivery
Check the unit upon delivery to ensure that all components were delivered
and that it is in proper working order. Contact your distributor if compo-
nents are missing or damaged. The unit must not be operated if compo-
nents are missing or damaged.
The steam generator is delivered ex works with an output of 3.0 kW, 4.0 kW
or 6.0 kW. The scope of delivery also includes the following parts for all
steam generator models:
SteamAttrac – scope of delivery
A
SteamAttrac steam generator
B
Installation and Operating
Instructions
C
SW8 hexagon key
D
Ball valve and motor
B
Four 5x35 screws with four S6
anchors for installing the steam
generator on the wall
A
E
C
B
D
