SBM-IR Modul - Operating Instructions
13
Operation
3.3 EmoTouch 3
The graphic user interface displays icons depending on the selection. Their
use is described below:
The home screen (standby) appears after the display has not been touched
for 10 seconds.
Settings that have not been saved are lost.
Date and time are saved if the built-in battery is in working order. All
other settings are saved permanently.
Add-on modules or accessories are detected once the unit is switched on
again and their corresponding icons appear on the cabin image or in the
sub-menus. Unit operation and unit settings are available on different lev-
els:
Tap briefly on the cabin image: The function is switched on or off.
Tap briefly on the sub-menu: The icon is selected.
Tap again: The selection is confirmed.
Press and hold: A sub-menu opens.
Tap anywhere on the cabin image: The sub-menu for settings closes.
Cabin on/off
Settings
Next
Back to previous selection or
start
Confirm selection
Clear selection
Increase the value by 1
Decrease the value by 1
Operation
level
Private operation
Commercial opera-
tion
Basic settings
Advanced settings (with PIN code)
Service level
Settings for service technician (with PIN code)
