EOS Bi-O Thermat, Инструкция по сборке и эксплуатации

Страница: 24 / 41

24
GB
2. Connect the connection cable per the circuit
plan. A circuit plan is attached on the inside
of the terminal box cover.
3. Close the terminal box with the cover, di-
stance holder facing outwards. Use 2 screws
for this (Fig. 4)
4. Hang the sauna oven onto the wall bracket
with the receptacle slits on the back wall, and
lay it against the distance holder. (Fig. 6).
Terminal box
Fig. 4
Connection clamp
Locknut
Cable screwing
Fig. 5
5. Fix the sauna oven to the wall bracket by me-
ans of a sheet-metal screw through the dril-
led hole on the back of the oven (Fig. 7).
16 cm
Fig. 6
Fig. 7
Locking screw
Finnish (dry) sauna mode
The evaporator is not in use in this mode. It is
essential to ensure that no herbs or essences
remain in the herbs tray, as these could ignite
due to overheating. Add essences or infusion
substances to the infusion water only in accor-
dance with the manufacturer‘s specifi cations.
In the case of infusion at the end of a sauna ses-
sion, for a proper infusion eff ect, do not pour the
water from the ladle over the stones too quickly
but allow it to evaporate.