Basic Operation
Press [ADJ] button repeatedly can adjust
the screen angle gradually. The unit has 3
angles for adjustment. Each time you press
thebutton, the screen will move from one
angle to another angle on the same
direction. The
screen angle will
move on the
opposite
direction
if you operate it again.
Press [ADJ] button can adjust angle of screen
:
Turn on the unit again, theangle will back to
original setting.
Display position adjustment
SRC
OPEN
Press [OPEN] button, the screen will turn down,
press again,it will back to originality.
Volume
Increasing Volume:
Decreasing Volume:
Press the [VOL+]button to increase the
volume.
Press the [ VOL- ]button to decrease the
volume
MUTE
Press this button to turn off volume and again
to resume.
Eject
EJECT:
Press [ ] to exit the disc.
NOTE:
About 10 seconds after the disc ejected, if not
taken out, the disc will be absorbed in again.
Press [SRC] button shortly will turn the unit on.
Press [SRC] button shortly turn off.
Adjust Angle
CAUTION
Do not place any object on the screen, or
push it rudely.
Do not move the screen rudely.The movable
range of the
screen may be limited to different types of car
and install positions, etc.
7
