Eonon D2203D, Руководство пользователя

Страница: 39 / 46

INSTALLATION
Notes
Before finally installing the unit, connect the wiring temporarily, making sure it is all
connected up properly, and the unit and the system work properly.
Use only the parts included with unit to ensure proper installation. The use of unauthorized
parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger
if there is a sudden stop.
The semiconductor laser will be damaged if it overheats, so don't install the unit anywhere
hot--for instance, near a heater outlet.
If installation angle exceeds 30 from horizontal, the unit might not give its optimum
performance.
The cords must not cover up the area shown in the figure below. This is necessary to
allow the enginery to radiate freely.
30
38
Do not close this area
37