4) Assembly:
INSTALLATION GUIDE
Figure 4.7
Figure 4.8
Figure 4.9
•
Locate the pre-assembled frame sub-assembly
•
Locate the M8 x 70mm Flat head bolts included in
the hardware pack.
•
While holding the leg columns together, line up the
mounting holes in the legs with the clearance holes
in the frame sub assembly.
•
Slide the leg columns onto the beam.
•
Using the M8 x 70mm bolts, connect the legs to the
frame.
•
Again, verify that the leg columns are firmly secured
together and do not come apart.
•
Repeat the above steps for the other set of legs.
•
Locate the included black end caps.
•
Push in the end caps into the open ends of the
beam.
Leg Attachment
