4) Assembly:
INSTALLATION GUIDE
10
Fig. 1
- Attach EBF1 to all crossbar ends (EBCB48,
EBCB60, EBCB72)
Fig. 3
- Connect crossbar to EBE48 or EBE60 using
qty. 1, EBF1, EFF2 and 200-28147
- Repeat for all crossbars.
-
Note
- Connection to mid run leg shown in Fig. 2 is
the same as shown in Fig. 3.
Fig. 2 (for 2, 3, 4 and 5 bar tables only)
- Connect qty 2, EBDD60 to qty 2, EBSL using
fastener 200-26469, flat head screw.
-
Note
- Holes on side of EBDD60 face outward.
- Countersunk holes on EBDD60 face up.
Fig. 4
- Remove backer from disks on crossbar
(EBCB48 / EBCB60 / EBCB72) and attach
plastic disk (EBF9A) to adhesive.
- Place one EBF9A at all locations of stickers.
