![background image](http://html.mh-extra.com/html/enwork/amb096lbe1-d-l/amb096lbe1-d-l_installation-manuals_2416511021.webp)
3) Assembly:
INSTALLATION GUIDE
Connecting Beams
1/4” Drive Bit or Allen
Wrench
Drill / Driver with
torque settings
Socket Wrench
Underside View
4) Slide other Ambition beam onto
installed support bar.
Do not Install second set of support
bar screws yet. Support bar screws
install in following steps.
1/4” Socket
5) Insert square nut into
rectangular hole on beam
connecting block
6) Insert 2 ¾” long bolt into
large round hole on opposite
connecting block and
tighten.
TIP
Using a 1/4” socket and socket extension with a
1/4” hex drive bit works well to install long
connecting bolt.
Supporting the bottom of the Beam while
tightening will help secure the connection with
less effort.
Socket Extension
TIP
When tightening connecting bolt hold
the sides of Ambition Beam end caps
to help align all sides of assembly.
22 www.Enwork.com
Содержание AMB096LBE1*D-L
Страница 1: ...Ambition Beams AMI0001 Revision A 12 05 17 Power and Data System Installation Guide ...
Страница 3: ...1 Parts and Fasteners INSTALLATION GUIDE Ambition 2 Beam Hardware Kit AM0002 4 www Enwork com ...
Страница 4: ...1 Parts and Fasteners INSTALLATION GUIDE Ambition 3 Beam Hardware Kit AM0003 5 www Enwork com ...
Страница 19: ...3 Assembly INSTALLATION GUIDE Leg Mounting Overview 20 www Enwork com ...