[Note] This device is not recommended to use USB interface
to charge, please use the special power adapter for
charging.You should charge the battery for at least
8
-
12
hours
to
make
sure
the
battery
is
fully
charged
at
the
first
time
.
On
chargi
ng
the
Power
indicating lamp of the device is in high
light blue color, the desktop icon of the battery keep
rolling which shows it is connected to the device.
The device support handwriting, number, letter, pinyin etc.
switching as follows:
Click any text input area of the working program interface, it
will pop input keyboard interface, as shown below:
Press , then it will pop Input Method switch interface.Select
the input method you want here.
[Noted] After newly install input method, you should choose
Settings>Language & input>K
e
yboard & I
n
put
m
ethods
then you can use.
● I
nsert T-FLASH card
Insert the T-Flash card into the slot in direction of the devices
bottom shell until you hear a sound of click.
● B
rowse files in the memory card
In this MID device,you can view and use the needed files in
catologue of M
e
nu>File manager> SD Card.
● R
emove T-Flash card
Close all open files from the T-Flash, then enter MENU>
S
e
ttings>TF card and & device storage, click Unmount SD
card ,System will prompt that TF card was removed safely. Tap
with your fingertips to the pop-up T-Flash Card
[Note]
1. Do not insert the TF card by force, this card can only be
applied in one direction.
2. Do not remove the TF card before Un
i
nstalling it, or the
card may be damaged.
3. If the memory card is write-protected, data will not be
formatted and written, please remove the write protection
before such operations
4. Major brands memory card is recommended to avoid the
card is not compatible to this device.
5
.
please well note that the APK (such as application software and
games) is default installed to the device. (not the memory card)
3.8 Connected to the computer
One end of the USB line connect to the computer, the other
end connect the MID device , Select Settings>
About tablet>Build
the device will connect with computer, and you can copy
3.9
Browse
the
file
in
the
device
4
5
files to the device.
Number(click 5 times)
>Developer options>USB debugging
3.6 Switch input methods
3.7 Use Micro SD Card