Envision EN9110, Руководство по обслуживанию

Страница: 10 / 58

9
3. OPERATING INSTRUCTIONS
This procedure gives you instructions for installing and using the LCD monitor
display.
1. Position the display on the desired operation and plug–in the power cord into
External Adapter AC outlet. Three-wire power cord must be shielded and is
provided as a safety precaution as it connects the chassis and cabinet to the
electrical conduct ground. If the AC outlet in your location does not have
provisions for the grounded type plug, the installer should attach the proper
adapter to ensure a safe ground potential.
2. Connect the 15-pin color display shielded signal cable to your signal system
device and lock both screws on the connector to ensure firm grounding. The
connector information is as follow:
15 - Pin Color Display Signal Cable
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1. RED 9. 5V power from VGA-card
2. GREEN 10. Detect Cable
3. BLUE 11. SYNC. GND
4. GND 12. DDC-Serial Data
5. GND 13. HORIZ. SYNC
6. GND-R 14. VERT. SYNC
7. GND-G 15. DDC Serial Data
8. GND-B
1
6
11 15
5
10