7
Installing the Base and Connecting the Cables
1. Turn off your PC before connecting your LCD monitor to the PC.
2. Take the monitor out from the box and place it on the table,
with the front side facing down.
Note: Make sure the surface of the table is clean and covered with
a soft cloth to prevent damaging or scratching the panel when
assembling the LCD monitor.
3. Take off the plastic cover at the top of the stand of the LCD
monitor.
4. Pull up the stand of the LCD Monitor (max.25
°
) to connect the
cables.
5. Put the power cord and signal cable through the hole on the stand.
6. Connect signal cable and DC adapter connector to your Monitor. Make sure the
cable heads are securely connected.
7. Replace the plastic rear cover back at the top of the stand.
8. Hold the monitor and insert its stand downwards into the
base plate. Make sure the four clips on the stand click
lock to the base plate.
