D4K Pro® User Manual
D4K_UserManual_v1.3_EN.docx, 2021-02-12
Page 12 of 52
If you still have queries, please contact the manufacturer. See section
3.8
Personnel Qualification
Employees
Activity
Personnel specially
trained for the activity
Trained
operators
Instructed personnel with
specialist training
(mechanics/electrical
engineering)
Transport
X
–
–
Set-Up
–
–
X
Basic calibration tasks
–
X
X
Advanced calibration tasks
–
–
X
Operation
–
X
X
Troubleshooting and fault
elimination
–
X
X
Maintenance
–
X
X
Disposal/Recycling
X
–
–
Legend: X permitted, – not permitted
3.9
Personal Protective Equipment
IMPORTANT
When working with photopolymers, observe the instructions regarding personal protective equipment in the
relevant Material Safety Data Sheets supplied.
For reasons of accident prevention, make sure that all operators wear suitable protective clothing: protective gloves, safety boots,
laboratory coats, safety goggles, dust mask during post-processing.
3.10
Interventions in Emergency Situations
An intervention in emergency situations includes individually or in combination:
•
Shutdown in case of an emergency;
•
First aid measures and medical attendance.
3.10.1
Shutdown in Case of an Emergency
In case of an emergency, press and hold the power button for 3 seconds to immediately shut down the printer.
3.10.2
First aid measures and medical attendance
Initiate the necessary first aid measures and seek medical attendance.
If a person has been exposed to the photopolymer, follow the instructions given in the respective Material Safety Data Sheet.
