Envirotainer RAP e2, Руководство по эксплуатации

Страница: 32 / 46

Operations Manual
7. CONTROL UNIT OPERATION
RAP e2 container
7.7 INFO BUTTON AND SEAL OF CONTROL UNIT
• Use the rectangular opening in the latch to seal the control unit ( Fig. 21 ).
• Use a seal with a cross section of at least 2 mm (0.08").
After the control unit has been sealed it is still possible to view information on the display using
the info button.
The recommended procedure is:
Fig. 21
1.
Press the Info button ( Fig. 21 ) to scroll
between default mode, alarm status and
alert status. The backlight will illuminate
for 20 seconds when the button is pressed.
NOTE!
It is only possible to toggle through the
menu with the Info button — no changes
to the set temp or other can be made.
26 (40)
Doc No:
MO-RAP-3079 Revision:
17 State:
Released Release Date:
2019-04-25 Approved By:
maxf