Environics 6202-1, Руководство оператора

Страница: 9 / 40

SYSTEM LAYOUT
ROBD2 USER’S GUIDE SEPTEMBER 2016
3
LCD Display
The liquid crystal display (LCD) is a four line, 20 characters display, protected by a
clear lens. The display is illuminated when the system is in operation.
Function Keys
Three function keys (
F1
,
F2
and
F3
), located below the display, and are used to
make various selections from the menu displayed on the bottom line of the screen.
The current function of each key is displayed above each function key The function of
each key will change, depending on the current operating mode.
Advance and Stop keys (program)
The
ADVANCE
and
STOP
keys are used while running a program in the Pilot Test
Mode (START mode). The
STOP
key aborts the program immediately upon pressing
the key. The
ADVANCE
key immediately advances the program to the next step.
Numeric Keypad
The numeric keypad is used for data entry of numbers 0 through 9 and a decimal
point. Pressing the
ENTER
key completes the entry of the numeric data selected.
Arrow Keys
The arrow keys are used to move the cursor on the display screen to and from
different fields located on the different entry screens or to scroll up or down a menu or
list of information. Pressing and holding the arrow keys will cause them to repeat.
Menu Key
The
MENU
key has no function while the system is in the Operator’s mode. This key
is used to move between multiple menus while the system is in the Administrator
(ADMIN) mode. The ADMIN mode is restricted to those who program the ROBD2.
Oxygen dump switch
This emergency stop switch causes the supply of 100% 02 to the subject under test.
Breathing mask connector
This female connection port (MS 22058-1), with spring-loaded cover, is for the pilot’s
breathing mask connection.
Pulse oximeter
The new 6202-1 pulse oximeter has a color touch screen. The details of the pulse
oximeter are covered in the pulse oximeter section of this manual