Enviroflex ENVIROMAC 107.1020, Руководство пользователя

Страница: 11 / 24

ENVIROFLEX
   
FOR A HEALTHIER WORK ENVIRONMENT
IN U.S.A.
ENVIROFLEX INTERNATIONAL INC.
1051 CLINTON ST.
BUFFALO NY, USA 14206-2823
TEL. (716) 883-2319 FAX (716) 892-2139
TOLL FREE 1-866-ENV-FLEX
Internet: http://www.enviroflex.com
Email: Info@enviroflex.com
IN CANADA
ENVIROFLEX INTERNATIONAL INC.
17 BROWNRIDGE RD. UNIT 8
HALTON HILLS, ONTARIO, CANADA, L7G 0C6
TEL. (905) 636-1177 FAX (905) 636-1178
TOLL FREE 1-877-ENV-FLEX
Internet: http://www.enviroflex.com
Email: info@enviroflex.com
4.4
Test Results
Average Penetration Degree 0.13% (tests)
Standard aberration: 0.05%
At a filtration speed of 0.056 m/s the average penetration degree is 0.5%. The test
requirements for the filter fabric efficiency for the category U.S.G. are successful.
Pressure Drop
Pressure Drop Pressure Drop
Pressure Drop
5.1
Filtration Speed: 0.056 m/s (11 ft./min.)
5.2
Filter Load 200 m³/m²/hr. (10.9 ft³/ft²/min.)
5.3
Test Results
Average Pressure Drop: 79 pa (6 tests on clean material) (0.3" W.G.)
6
Air Permeability Test: 506 m³/m²/hr (27.66 ft³/ft²/min.)
The air permeability of the filter material is ascertained at a differential pressure of
200 Pa. (0.8" W.G)
7.
Surface Weight Test: 273 g/m² (8.05 oz.yd.²
8.
Notes:
The requirements are fulfilled.
CLAR
CLAR CLAR
CLARIFICATION OF EUROPEAN STANDARD ZH1/487
IFICATION OF EUROPEAN STANDARD ZH1/487 IFICATION OF EUROPEAN STANDARD ZH1/487
IFICATION OF EUROPEAN STANDARD ZH1/487
The BIA is a government agency, which directs the setting up of rules and standards in order
to meet certain safety and quality standards in Europe. One of those is the AH1/487 ABS 2
test procedure for different filtering media used in dust collection equipment. The test is
carried out on small media samples, and the test dust is standardized. The approach velocity
on the media during the test is standardized on 11 F.P.M. (11:1 A/C ratio). During the test, a
quantity of approximately 0.078 Gr/cu.ft. of dust is fed to the media, and the penetration is
measured. In this way a certain penetration is determined which rates the media in
preclassified levels, the so called U.S.G. or C. The U media's are the lowest efficiency
medias; the C medias are the highest efficiencies. The maximum allowable penetration
degrees for the different classifications are:
Date
November 14, 2008
Section 2
Page 3 of 4