AF24, AF4
8
, AF80 Heavy Duty Water Softeners
© 201
6
Enviro Water Solutions LLC
3060 Performance Circle, Suite 2. DeLand, FL 32724
— Rev
A
Page 6
(844) 663-3078
Installation Overview
Figure 1
Pre-Installation
Bypass Valve Installation
Figure 2
If the
Blue
Clips are in the slots (female opening of Electronic Head) remove them. Push the male O-
Ring side of the Bypass Valve into the female opening of the Electronic Head. Push the
Blue
Clips back
into the slots to tighten.
Notice:
The Bypass Valve on the Electronic Head can be set to Bypass or Service by turning the knobs on the side
of the valve. If the holes are up and down then the tank is in the Bypass Mode. If the holes are side to
side then the tank is in the Service Mode. Do not remove the
Blue
C
lips from the Bypass Valve after
connecting to main water supply.
Softener Tank
Electronic
Head
Discharge
Line
Bypass
Valve
Overflow
Barb
Outgoing
Water to
House
Wall
Incoming
Water
Supply
Brine Tank
Holding Tank
Safety Valve
Softener Tank
Electronic
Head
Bypass
Valve
Blue
Clip
Front View