Enviro S20I, Руководство пользователя

Страница: 12 / 46

Turn off the Appliance
Press the ON/OFF Key on the Transmitter. The Transmitter LCD display
will only show the room temperature and Icon (see Figure 9). A single
“beep” from the IFC confirms reception of the command and both the
pilot light (if the unit is not set to continuous pilot) and main burner will
turn off.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control the comfort level in a
room. To activate this function, press the Thermostat Key (see Figure
4). The LCD display on the Transmitter will change to show that the
room thermostat is “ON” and the set temperature is now displayed (see
Figure 9). To adjust the set temperature, press the Up or Down Arrow
Keys until the desired set temperature is displayed on the LCD screen
of the Transmitter.
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in accordance to the difference between the set
point temperature and the actual room temperatures. As the room temperature gets closer to the set point
the Smart Function will modulate the flame down. To activate this function, press the Thermostat Key (Figure
4) until the word “SMART” appears to the right of the temperature bulb graphic (Figure 10). To adjust the
set temperature, press the Up or Down Arrow Keys until the desired set temperature is displayed on the LCD
screen of the Transmitter.
Figure 9: Remote Control Displays
Set Temperature.
Remote Flame Control
The Proflame 2 GTMF has six (6) flame levels. With the
system on, and the flame level at the maximum in the
appliance, pressing the Down Arrow Key once will reduce
the flame height by one step until the flame is turned
off. The Up Arrow Key will increase the flame height
each time it is pressed. If the Up Arrow Key is pressed
while the system is on but the flame is off, the flame will
come on in the high position (refer to Figure 11). A single
“beep” will confirm reception of the command.
Figure 10: Remote Control’s Smart Flame Function.
Figure 11: Remote Control’s Flame Levels.
Operating Instructions
12