Page 16
Maintenance And Service
A
g
Lass
D
ooR
R
emoVaL
:
Figure 19. Upper Door Latch
The door needs to be removed for sceduled cleaning and other options. To remove the glass door use your
two index fingers to pull the spring latches up over the two door tabs. Once released, pivot the door out
and pull it up off the bottom door retainers. The door must be angled in order for it to pull out. To replace
the glass door, simply reverse the above procedure.
WARNING:
Do not touch or attempt to remove the glass door if the fireplace is not completely cold.
WARNING:
Never operate the fireplace with the glass door removed.
Figure 20. Door Removal Motion
b
uRneR
R
emoVaL
:
The burner may need to be removed for a few reasons, including cleaning under the burner or to be
replaced all together.
Proceed only when the unit has completely cooled down.
Figure 10. Removing Burner
Step 1:
Remove the glass door as shown in
the
m
aIntenance
anD
s
erVIce
- g
lass
D
oor
r
emoVal
.
Step 2:
Remove the log set and fire grate
as shown in S
econDary
I
nstallatIon
- f
Ire
g
rate
anD
l
og
s
et
I
nstallaIon
Step 3:
Pull the burner up and then out of the
venturi box and out.
To re-install the burner follow steps 1-3
in reverse. When placing the burner back
in the unit be sure not to move the air
shutter. Insure the front and rear lengths
of the burner tube are parallel as it may
have distorted with heat over time. The
ideal placement for the burner tube
is keeping it forward up against the
burner stand stops.
Содержание Q3LI
Страница 45: ...Page 45 Parts Diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ...
Страница 46: ...Page 46 Notes ...
