7
6. To stop the hand-held blender by releasing the low speed button or high
speed button of the motor unit.
CLEANING AND MAINTENANCE
1. Unplug the appliance and remove the detachable stem.
Note:
Do not immerse the detachable stem of the blender in
water because overtime the lubrication on the bearings may
wash away.
2. Wash the detachable stem under running water, without the
use of abrasive cleaner or detergents. After finishing cleaning
the detachable stem, place it upright so that any water which
may have got in, can drain out. The stem is dishwashing safe
component.
3. Wash the cup, bowl, beater and blade in warm soapy water.
The bowl and the beater are not recommended to place in
dishwashing machine as the plastic component deteriorates through
prolonged use of dishwasher cleaning.
4. Wipe the motor unit with a damp cloth. Never immerse it in water for
cleaning as a electric shock may occur.
5. Dry thoroughly.
Caution:
Blades are very sharp, handle with care.
6. Reassemble the blender shaft to motor unit then place it upright in wall
bracket (see Fig.4) or hang it up for saving space.
QUICK CLEANING
Between processing tasks, hold the hand-held blender in the cup half filled
with water and turn on for a few seconds.
Fixing wall bracket
You can fix the wall bracket as following:
1. Drill two same holes in wall and strictly follow the
6mm
51mm
Fig. 5
