12
Figure 13: Low Battery
Split Flow Operation
The split flow operation will turn off the rear burner
which will greatly reduce the heat output of the
fireplace. Press the mode key on your remote
transmitter to access the split flow function indicated
by a double flame icon (see Figure 14). Use the UP/
DOWN key to cycle between the split flow valve on
and off. This function will not affect the flame setting
of the remaining flame.
Figure 14: Split Slow Function
Low Battery Power Detection
A low battery icon will be displayed on the remote transmitter when the batteries
are low. It is advisable to change the batteries at this point before all power is
lost from the remote.
There is now icon on the remote transmitter indicating low battery power for the
IFC. The IFC will emit a beep when the ON/OFF key is pressed indicating the
batteries are low.
The system will need to be initialized after battery replacement (see
I
nItIalIzIng
the
s
ystem
). The life span of the batteries depends on various factors such as
battery quality, ignition attempts, remote usage, and power outage duration.
Figure 12: Key Lock
Key lock
This function will lock the keys to avoid unsupervised operation. Press the MODE
and UP key simultaneously to activate this function. Repeat this sequence to
deactivate. A lock icon will be displaced on the screen when activated.
Figure 11: Fan Control
Fan Control
The Proflame 2 remote control system has six (6)
fan speed levels. Adjust the fan speed using the
UP/DOWN key; each time the button is pressed
the IFC will beep to confirm your command. The
remote display will show which level the fan speed
is currently at.
Operating Instructions
