Enviro G50GI Скачать руководство пользователя страница 8

Страница: 8 / 56

Operating Instructions

For Your Safety, Read Safety Precautions And

Lighting Instructions Before Operating

Figure 3: Proflame 2 Transmitter.

echnicaL

ata

Transmitter (Remote Control):

Supply voltage: 4.5 V (three 1.5 V AAA batteries)

Radio frequency: 315 MHz

Integrated Fireplace Controller (IFC):

Supply voltage: AC IN - 120 V / 60 Hz

Battery Backup IN - 6 Vdc - 200mA (four 1.5 V AA batteries)

Spark voltage / frequency: >10kV / 1Hz

Comfort modulating fan: 120 V / 60 Hz / 2A

Auxiliary: 120 V / 60 Hz / 5A

RansmitteR

The Proflame 2 Transmitter is a remote control with a blue backlit lcd display. It uses a streamline design with

a simple button layout and informative lcd readout (Figure 3). The Transmitter is powered by three (3) AAA

type batteries. A Mode Key is provided to Index between the features and a Thermostat Key is used to turn

on/off or index through Thermostat functions (Figure 8 & 9).

ystem

escRiption

The Proflame 2 Remote Control System consists of two (2) elements:

1. Proflame 2 Transmitter.

2. Integrated Fireplace Controller (IFC) and wiring harness to connect to the gas valve, stepper motor

battery holder, convection fan, and lights.

ATTENTION!
- TURN “OFF” THE MAIN GAS SUPPLY OF THE APPLIANCE DURING INSTALLATION OR

MAINTENANCE OF THE IFC.

- TURN “OFF” MAIN GAS SUPPLY TO THE APPLIANCE PRIOR TO REMOVING OR REINSERTING

THE BATTERIES IN THE BATTERY HOLDER

Blue Back lit LCD display

UP/DOW N Arrow Key

ON/OFF Key

THERMOSTAT Key
MODE Key

For G50GID models refer to the separate Dexen user

manual supplied for remote control operations.

Содержание G50GI

























































Результаты поиска

Содержание G50GI

Отзывы:

Бренды по названию

Популярные бренды

Enviro G50GI, Руководство пользователя

Результаты поиска

Содержание G50GI

Отзывы:

Бренды по названию

Популярные бренды