26
Initial Installation
QUALIFIED INSTALLERS ONLY
c
ooL
s
uRFace
i
nstaLL
o
ptions
:
This fireplace is manufactured with a built-in heat distribution kit, referred to as the Cool Surface System
(CSS). The purpose of the CSS is to dramatically reduce the front wall temperatures above your fireplace.
This is very useful when delicate objects such as a TV or artwork are mounted above the unit. Using this
feature will also allow you to use combustible facing materials right up to the finishing edge. It is extremely
important these instructions are followed meticulously. If not installed correctly this could be very dangerous
and could lead to building fire. If the CSS is activated it is crucial that the chase is vented in accordance to
this manual. There are a few different options available to finish the CSS.
Option 1: Front Discharge (flush wall installations) -
Construct the framing in a way that provides a
minimum 41
1/2
inch (1054mm) by 2 inch (51mm) gap at the top of the facing wall. It is essential that these
dimensions are respected and not deviated away from them when using combustible materials inside or
outside the chase (see Figure 36A).
Option 2: Front Bezel -
The included bezel may be desired to accentuate the front discharge (Option 1).
This installation will also cover the edge of the finishing material at the cutout. The top of the cutout must
be 1 1/2” from the top of the chase (see Figures 36A & B). It is essential that these dimensions are followed
and not to deviated from them when using combustible materials inside the chase.
Note: If you wish to construct the CSS air discharge part way up a tall wall then it is essential to build a
false ceiling inside the chase at the desired height to direct the rising heat out of the gap.
39
1
4
"
997mm
9"
229mm
72"
1829mm
MIN (NG)
80 "
2045mm
MIN (LP)
41
1
2
"
1054mm
MIN
1
1
2
"
38mm
MAX
2"
51mm
MIN
68
1
2
"
1740mm
MIN
Non-Combustible board
NOT
mandatory for CSS Install.
CSS Air Discharge
1
2
Figure 36A: Options 1 &2 Front
Discharge
0 to 1 12 "
38mm
Maximum
2"
51mm
CSS Bezel
Included
With Unit
Figure 36B: Option 2 Front Bezel
Figure 36C: Front Bezel Iso View
Содержание G39GI
Страница 51: ...51 Parts Diagram 1 2 3 4 5 6 12 7 8 11 10 9...
Страница 52: ...52 Notes...
