Building a be er future together
Enviro UK Ltd., Commerce Court, Cutler Heights Lane, Bradford, BD4 8NW.
01274 662226 | [email protected] | www.envirouk.com & www.becsuk.com
TEC-ENV908-EG
Ethernet Gateway Set-Up
Please refer to the following pages for detailed instructions on the correct procedures for setting up the Ethernet
gateway.
Please note the following settings should be used:
Module IP
The IP address being allocated to the gateway
Default Gateway IP
The default gateway IP address being allocated.
If this is not available (enter zeroes in these fields)
Subnet Mask
The desired subnet mask
Socket Timeout
90
Converter Mode
0
Char Timeout
0
Port Number
N/A
Server IP
N/A
Watchdog Interval
15 Minutes
Baud Rate
4800
Data Bits
8
Stop Bits
1
Parity
None
RS232/RS485
RS485
Serial Reply Timeout
25
RS485 On Delay
5
RS485 Off Delay
0