background image

35

Warranty

Sherwood Industries Ltd. offers a Limited Lifetime Warranty on this gas product.  This Limited Lifetime 

Warranty covers the appliance for a period of seven years from the date of installation. This warranty 

applies only to the original owner in the original location.
Covered under the lifetime warranty are the chassis and the heat exchanger.  These steel components 

are covered against manufacturer’s defects for seven years and the labour for the first year. The following 

exclusions apply: over-firing due to incorrect setup or tampering, damage caused by incorrect installation, 

usage or abuse.  The unit must be properly installed by a qualified technician or installer, and must meet 

all local and national gas and building code requirements.
Under the Limited Lifetime Warranty, the following components are also covered: log set, burners and 

glass. The following exclusions apply:

 Plated Finish:  Damage caused by scratching, marring, chemicals, fingerprints, abrasive cleaners or 

discoloration with age.  Items with Antique Copper that have had a green discoloration of the finish. 

If discoloration occurs, please follow the cleaning instructions as outlined in the “Maintenance And 

Service” section.

 Glass:  Damage  caused  by  the  use  of  harsh  or  abrasive  cleaners,  striking  the  glass,  surface 

contaminants

 Log Set: Damage caused by incorrect handling or misuse

 Burners: Damage caused by improper or continuous operation under incorrect conditions

Sherwood Industries Ltd. offers a two-year warranty on all the electrical components and gas components, 

against manufacturing defects.  Paint is also covered against flaking.  This offer includes parts and labour 

for one year, and parts only thereafter.

Your  dealer  shall  make  all  claims  under  this  warranty  in  writing.  When  filing  a  warranty 

claim please complete the following information on an official warranty claim form:
TO THE DEALER:

Name, address and telephone number of purchaser and date of purchase, date of installation, name of 

installer and dealer, nature of complaint, defects or malfunction, description and part number of any parts 

replaced.

TO THE DISTRIBUTOR:

Sign and verify that work and information are correct.

This warranty covers defects in materials and workmanship only if the product has been installed according 

to the manual’s instructions. If the product is damaged or broken as a result of misuse or mishandling, 

the warranty does not apply. The warranty does not cover removal and reinstallation costs. 
Sherwood Industries Ltd. reserves the right to repair or replace the defective product. The shipping costs 

are to be paid by the consumer.  All warranties by the manufacturer are set forth and no claim shall be 

made against the manufacturer on any oral warranty or representation.
Sherwood Industries Ltd. and its’ employees or representatives will not assume any damages, either 

directly or indirectly, caused by improper usage, operation installation, servicing or maintenance of this 

appliance.
Sherwood Industries Ltd. reserves the right to make changes without notice. Please complete and mail 

the warranty registration card and have the installer fill in the installation data sheet in the back of the 

manual for warranty and future reference.

Содержание DV50DX LPG





































Отзывы: