8
Operation steps
1.
SET 70 (71/72/73/74/75/76/77) preset,Setting up cruise preset,(Seven other items can be set up
as well.)
2.
Select the preset number to be added,Use the SET Preset Bit Number command,Add up to 32
presets(Note: It can be repeated. The number of useless presets is also occupied.)
3.
SET 96,Complete this setup.
4.
Repeat steps 1, 2 and 3 to complete other cruise settings
5.
Setting Cruise Interval Time by Pre-positioning No. 78 and No. 79,Default 15 seconds
SET 78:5S CALL 78:15S SET 79:30S CALL 79
：
60S
6.
CALL 70 (71/72/73/74/75/76/77) preset,Call the corresponding Cruise
7.
CLEAR 70 (71/72/73/74/75/76/77) preset,Delete the corresponding Cruise
8.
CALL 96,Stop cruising(Or give PTZ any processable instructions to stop cruising)
Example:Setting up the first cruise:Set the preset bit number for the scene to be monitored
first,For example, 1-8 preset.Then SET 70 preset,Re-select the cruise preset that needs to be
added,For example, No. 1, 2, 3, 4 preset,SET 1, SET 2, SET 3, SET 4 preset position.Operation
SET 96 preset,By this time the 1 - 4 preset was added to the first cruise.SET 78 preset can set
cruise preset interval to 5 seconds.CALL 70 is preset to start the first cruise.
Setting up the second cruise:Set the preset bit number for the scene to be monitored first,For
example, 1-8 preset.Then SET 71 preset,Re-select the cruise preset that needs to be added,For
example, 5, 6, 7, 8 preset,SET 5, SET 6, SET 7, SET 8.Operation SET 96 preset,By this time, the
5 - 8 reserve was added to the first cruise,SET 78 preset can set cruise preset interval to 5
seconds.CALL 71 is preset to start the second cruise.
3-8 operation analogy
C.
Watch position setting
Operation steps
1.
Watching mode is selected by 64 and 65 preset position: default is 66 preset position (need to
be set);
2.
Set Preset No. 66 as a Preset for Watcher Call
3.
Open and close the watchdog function by preset position 67 (default is on)
4.
Selection of Watch Position Silence Time Limit by Preset Positions 68 and 69: Default 30
seconds
Preset position number
SET
CALL
Keep watch mode(3)
64
Watch to No. 66 Reserve
Watch for the first scan (to be
set)
65
Watch Article 1
Inspection (to be set)
Keep Watch switch
67
Turn off the watchdog
function
Open Watch Position Function
Silent time limit
68
30s
60s
