envea STACK 602, Руководство пользователя

Страница: 40 / 68

9 Maintenance STACK 602
40
(PC-000848-MA Issue 5, December 2021)
ENVEA UK Ltd
7.3 Adding Sensors
Sensor channels can be added to the control unit manually or automatically by
using the Autodetect functionality.
NOTE
: The manual method should only be used to add sensors when manual control of the
order in which the devices are displayed is required or only specific sensors are to be
added. For details on how to add sensors manually, refer to the relevant manual.
7.3.1 Detecting Devices Automatically (Autodetect)
In Autodetect mode, the control unit scans all Modbus addresses to identify all
sensors and devices in the network.
Select Setup | Autodetect to initiate the search. The menu sequence is shown
below (see
Figure 18
below).

The control unit will now attempt to configure all the sensors in the network
with the default settings.
 When this is complete, the sensor data is displayed on the Multiple
Devices screen. Open this screen from the icon bar, then use the Bar/Text
button (on the left of the screen) to switch between views and the scroll bar
(at the top left of the screen) to view all available channels and their values.
Figure 18: Running Autodetect (example).