DATASHEET
5 |
Storm 8 (70056)
Visit the
ENTTEC website
for the latest version.
ID: 5933191
Document Updated: Oct 2021
Home
Home tab displays the following information:
Device (Node) Name.
Firmware version on device.
DHCP status – (either enabled / disabled).
IP address.
Netmask.
Gateway.
Mac Address.
Link Speed.
Input protocol set on device.
Output ports status
o
Universe
▪
Click on universe underlined in blue to inspect
DMX value per channel)
o
Merge status
▪
ErrorD: Merge is disabled but detected multiple
data source from more than 2 IP address.
▪
ErrorE: Multiple data source from more than 2 IP
address detected.
Settings
Settings tab displays the following information:
Change a device (Node) name for
identification.
Enable/disable DHCP.
Specify static network settings.
Set the input protocol (Art-Net, sACN)
Set DMX outputs ports settings
o
Enable/Disable port
o
Universe
o
Refresh rate
o
Merging option
▪
None (Merging is disabled, support 1 source
only)
▪
HTP (Highest takes precedence, 2 sources)
▪
LTP (Latest takes precedence, 2 sources)
Reset to factory defaults.
Reboot the device.
Network stats
The Network page shows statistics for the DMX protocol enabled.
Art-Net
The information provided is:
Poll packets received.
Last IP poll packets were received from.
Last port data received from.
DMX Data Packets Received
DMX Data Packets Sent
sACN
The information provided is:
Data packets received
Data packets sent
Last IP
Last port
