Pixie User Manual
50478 (H)
www.enttec.com/pixie
1
ID:
24
ENTTEC PIXIE DRIVER
Features
Drives 2 DMX universes worth of 5 Volt Pixel Tape
or 12/24V Pixel Dots (model dependent).
In-Built 5V DC power supply with 55 and 110
watts output power units available (pn: 73540 and
73451)
In-Built 12V DC power supply with 65 and 130
watts output power units available (pn: 73542 and
73453)
In-Built 24V DC power supply with 65 and 130
watts output power units available (pn: 73547 and
73548)
Enhanced data outputs with surge protections
D3 is a duplicated output of D1 for backup
D4 is a duplicated output of D2 for backup
55W and 65W drivers can individually control and
power up to 300 RGB pixel LEDs
110W and 130W drivers can individually control
and power up to 600 RGB pixel LEDs
Smart thermal management
DMX512 Controllable and USB configurable
Supports RGB and RGBW pixel tape and pixel
dots based on WS2811, WS2812 & WS2812B.
Quick 2 steps test installation: connect your pixel
strips to the screw terminal output and plug
mains cable to a wall outlet. It is that easy!
Standalone test output sequences (no external data
required)
Show record and playback (Art-Net to USB using
PRO-Manager App)
Power and output status LED indicators
High quality powder coated metal box
Scalable design for large projects
Up to 8 units stackable using standard 19” modular
rack accessory (sold separately)
Standard IEC mains and 5Pin-XLR DMX input con-
nectors
Plug-unplug screw terminal output connector
Automatic multi voltage mains input (110-250V AC)
Safety
This unit is intended for indoor use only
Do not expose the PIXIE DRIVER to rain or moisture,
doing this will void the warranty
Make all the connections before you plug in the
mains power
Do not remove the cover, there are no serviceable
parts inside
Never plug this unit in to a dimmer pack
Always be sure to mount this unit in an area that will
allow proper ventilation. Allow about 6” (20 cm) be-
tween this device and a wall
