PIXELATOR (70060)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
8
|
ID: 2114
Hardware version: RevC
Document Updated: May 2021
4-Lock Unit (revB only):
Provides the option to lock your device by disabling the web interface to provide
an additional level of security to your installation. By locking your device, the web server becomes inactive
meaning that your configuration cannot be modified. Factory resetting a device will not unlock the device,
this must be done using the LCD menu. ENTTEC strongly recommend you secure your network and do not
connect your lighting control network to the internet without with relevant precautions in place. If unsure
consult a specialist within this field.
To lock and unlock your device follow these simple steps on the devices LCD menu:
1.
Press Enter on the units LCD menu
2.
Navigate to option 4-Lock Unit and press Enter
3.
Select Yes to lock or No to unlock.
4.
Wait 10 seconds for this to take effect.
5-Restart:
You will be asked to confirm that you want to restart your PIXELATOR.
Once confirmed, the PIXELATOR will stop the output engine and restart the system. This process will take a
couple of minutes. While rebooting the LCD screen will change between a couple of screens, the restart will
be complete once the Main Menu is displayed
System Restarting
Please wait …
Out of the Box
As default, the PIXELATOR will have the Artnet48->Pixel24 Profile active, this profile will take 48 Art-Net
universes starting at universe 0 (0x00) and convert them to 24 Pixel-Link streams on ports 1 to 24. (Each
Port will be mapped to 2 sequential Art-Net Universes).
The PIXELATOR will be set to a DHCP IP address as default. A DHCP server is required be required.
Networking
The PIXELATOR can either be configured to be a DHCP or Static IP address.
DHCP:
On power up and with DHCP enabled, if the PIXELATOR is on a network with a device/router with a
DHCP server, the PIXELATOR will request an IP address from the server. If the DHCP server is slow to respond,
or your network does not have a DHCP server, the PIXELATOR will fall back to the Static IP address. If a DHCP
address is provided, this can be used to communicate with the PIXELATOR.
Static IP:
By default (out of the box) the Static IP address will be unique based on the devices Serial Number
(See out of the box section for details). If the PIXELATOR has DHCP disabled or if the PIXELATOR falls back
to the Static IP address after being unable to find a DHCP server, the Static IP address given to the device
will become the IP address to communicate with the PIXELATOR. The fall-back address will change from the
default once it is modified in the web interface.
1-YES
2-NO
