User Manual
Document PN: 50847
www.enttec.com
Covered by US patent 08950901
4
channel value, with 011 the lowest frequency (about 0.3
flashes per second) and 255 the highest one (25 flashes
per second).
The strobe channel can be used in conjunction with all
the other channels, so you can change the current output
colour or the master intensity whilst strobing at the
selected frequency, all at the same time.
MASTER DIMMER (CH8)
drives the general intensity,
multiplying with all other current output channels, with
000 the lowest intensity 0% (light will be OFF, regardless
of other channel values) and 255 the highest, allowing
100% whatever other channels are demanding.
TRUE CCT MODE (CH9) will turn the ALEPH2 ET Mk2 bar
into a true colour temperature adjustable fitting,
simulating a tungsten light behaviour.
The white colour feature can be activated by setting the
channel to a value greater than 010. CH9=011 will produce
the warmest white and 255 the coolest one. Values
between 000-010 will stop the true CCT feature.
The true CCT mode channel can be used in conjunction
with strobe and master dimmer features, so you can
strobe and/or dim the current white output set by this
channel.
The ALEPH2 ET Mk2 has been laboratory calibrated to
closely follow the black body Locus curve. With 8 bits
resolution allowing the light to travel from TRUE warm to
cool whites (12000K to 1800K) keeping a high CRI for natural
colours.
6 – 8BIT 1CHANNEL MODE
This mode turns the Aleph 2 ET Mk2 into a single colour,
single channel dimmer.
The output colour is not any specific kind of white and this
mode is not tuned up to produce balanced output. It is only
meant to produce as much light as possible using only one
control channel.
This mode is often used to control custom built A2 lights
where only white LEDs are populated instead of coloured
LEDs.
Presets Menu
The Aleph2 ET Mk2 has 64 available slots where the user can
record custom colours from DMX. These can later be
activated from the menu. Presets turn the ET into a stand-
alone fitting, where 64 different colours can easily be
triggered on-site, without the need of DMX.
It is also possible to record user personalised presets on
any of the 64 memory slots, overwriting the default ones.
RECORDING CUSTOM PRESETS:
