Pixel Octo User Manual
For latest version visit:
www.enttec.com
10 December 2019
M-files ID: 4836041
Page|
2
Functional Features
•
Supports the following protocols:
o
Art-Net
o
Streaming ACN (sACN)
o
ESP
o
KiNET
•
Configurable Static or Dynamic (DHCP) IP (DHCP
by default).
•
Web configurable
•
Firmware updateable
•
Netmask and gateway updateable
•
Up to 8 ethernet universes support (maximum
of 4 universes per output port)
•
Controls a maximum of 680 RGB or 512 RGBW
pixel LEDs (per output).
•
Configurable pixel colour ordering
•
Monitors device temperature
•
Monitors and displays the network traffic
•
Easily extendable network – daisy chain
ethernet connection up to maximum of 50
•
Compatible with CLK LED Tapes
•
White Pixel Order support
•
35mm DIN mountable
•
Flexible wiring configurations
•
User-friendly interface to create and execute
live effects on the fly
•
Save created effects into a list of
standalone
shows
•
Maximum output refresh rate is 46 frame per
second
Hardware Features
•
Aluminium Enclosure
•
Top view indicator lights and button
•
Pluggable terminal blocks
•
Dual Spring 35mm DIN rail brackets
LED Status
Status
•
This LED indicates the Pixel Octo status and
should be constantly flashing.
•
The current operating status of the LED is
indicated as follows:
Link 1 and Link 2
•
These two LEDs indicate network status for
each RJ45 port
Identify Button
The identify button serves 2 purposes:
•
Identify the corresponding pixels connected to
a specific Octo
•
Reset Pixel Octo (
When identify button is pressed, all DMX channels
of the pixels connected at the output will be driven
to the maximum value for ten seconds.
LED Colour
Unit Status
Red
Device in boot
White (static)
Idle
Purple (static)
IP Conflict
Green over white
Direct mode data receiving
Black over white
Standalone mode
Red over green
Multiple merge sources
