DIN ETHERGATE (71030)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
12
|
ID: 5928465
Document Updated: August 2022
Factory Default
: Factory resetting the DIN ETHERGATE results in the following:
Resets the device name to defaults
Enables DHCP
Static IP 192.168.0.10 / Netmask 255.255.255.0
Output protocol is set to Art-Net
Merging is disabled
Port 1 Universe 0
Port 2 Universe 1
RDM is enabled
Restart Now
: Please allow up-to 10 seconds for the device to reboot. When the web interface page refreshes
the DIN ETHERGATE is ready.
Network Stats
The Network Stats tab is designed to provide an
overview of network data. This is categorised into DMX
over Ethernet protocols statistics which can be located
within the tabs.
The Summary provides details regarding total packets
sent /received, alongside Poll packets, last IP address
and Port.
Art-Net Statistics also provide a breakdown of Art-Net
DMX packets sent and received. As well as a
breakdown of RDM over Art-Net packets including
packet sent and received, Subdevice and TOD
Control/Request packets.
Update Firmware
When selecting the Update Firmware tab, the DIN
ETHERGATE will stop outputting and the web interface
boots into the Update Firmware mode takes up-to 10
seconds.
This mode will display basic information regarding the
device including current Firmware Version, Mac Address
and IP address information.
The latest firmware can be downloaded from
. Use the Browse button to access in
your local computer for the latest DIN ETHERGATE
firmware file which has a .bin extension.
Next click on the Update Firmware button to begin
updating.
After the update has completed, the web interface will load the Home tab, where you can check the update
was successful under Firmware Version. Once the Home tab has loaded, the DIN ETHERGATE will resume
operation