ODE MK3 (70407)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
5
|
ID: 5946689
Hardware Features
▪
Electrically insulated ABS plastic housing
▪
2* 5-Pin Female XLR for Bi-directioal DMX Ports
▪
1* RJ45 EtherCon Connection
▪
1* 12
–
24V DC Jack
▪
2* LED Indicators: Status and Link/Activity
▪
IEEE 802.32af PoE (active PoE)
DMX Connectors
The ODE MK3 features two 5-Pin Female XLR bi-directional DMX ports, which can be used either for DMX in
or DMX out, depending on the settings set within the Web Interface.
5pin DMX OUT/ DMX IN:
Pin 1: 0V (GND)
Pin 2: Data -
Pin 3: Data +
Pin 4: NC
Pin 5: NC
Any suitable 3 to 5pin DMX adaptor can be used to connect to 3pin DMX cables or fixtures. Please note the
pinout, before connecting to any non-standard DMX connector.
LED Status Indicator
ODE MK3 comes with two LED indicators located between the DC Jack input and the RJ45 EtherCon Connector.
▪
LED 1
:
This is a
S
tatus indicator which blinks to indicate the following:
Frequency
Status
On
IDLE
1Hz
DMX / RDM
5 Hz
IP CONFLICT
Off
ERROR
▪
LED 2:
This LED is a
Link or Activity indicator which blinks to indicate the following:
