Storm 8 (70055)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
8
|
ID: 2348851
Document Updated: May 2021
Save:
All changes must be saved to take effect the STORM 8 takes up-to 10 seconds to save.
Factory Default:
STORM 8 will be reset to Factory condition, including the DHCP being enabled, with the
original fall-back static IP and with all setting reset (see the Out of the Box section).
Reboot/Restart:
Please allow up-to 10 seconds for the device to reboot. When the web interface page
refreshes the STORM 8 is ready.
Network Stats
The Network Stats tab is designed to provide an overview of the network data. This is broken down into
Ethernet-DMX protocols statistics which can be located within the tabs.
The Summary provides details regarding total packets sent
/received, as well as Poll packets, last IP address and Port.
Art-Net Statistics also provide a breakdown of Art-Net DMX
packets sent and received. As well as a breakdown of RDM over
Art-Net packets including packet sent and received, Subdevice
and TOD Control/Request packets.
Update Firmware
On selecting the Update Firmware tab, the STORM 8 normal operation will stop, and the web interface boot
into the Update Firmware mode takes up-to 10 seconds.
This mode will display basic information regarding the device
including current Firmware Version, Mac Address, Serial Number
and IP address information.
Using the Choose File button, browser your local computer for the
latest STORM 8 firmware file, this will have a .bin extension. The
latest firmware can be downloaded from our website.
Next click on the Update Firmware button to begin updating.
After the update has completed, the web interface will load the
Home tab, where you can check the update was successful under
Firmware Version. Once the Home tab has loaded, the STORM 8
will resume operation.
DMX ports
The STORM 8 features eight RJ45 connectors which output USITT DMX512/1990. A conversion can be made
from RJ45 to XLR 3/5 to connect into fixtures.
DMX Connectors
RJ45 DMX OUT:
Pin 1: Data +
Pin 2: Data –
Pin 7: Ground
