DMXPlayBack MK2 User Manual
39
Power up Show
To set the Show file that will be played whenever the DMXPlayBack is
switched on:
Select
DMXPlayBack MK2
then
Options
, from the main
menu.
In the
Power up Show
box, select the number of the Show to
be played or NIL if this function is not required.
Click on the
Change
button to send the new setting to the
DMXPlayBack.
Switch Close Show
To set the Show file that will be played whenever the external switch
function is triggered:
Select
DMXPlayBack MK2
then
Options
, from the main
menu.
In the
Switch close Show
box, select the number of the Show
to be played or NIL if this function is not required.
Click on the
Change
button to send the new setting to the
DMXPlayBack.
Note:
The switch function is triggered by making an electrical
connection between Pin4 (Switch) and Pin1 (Ground) of the DMX In
connector on the rear of the DMXPlayBack.
Updating the Firmware in the DMXPlayBack MK2
From time to time new versions of the firmware (internal operating
software) for the DMXPlayBack MK2 may become available, to add
features or fix an operational problem that has been discovered.
Updates are made available from the
Downloads
section of the Enttec
website at
www.enttec.com
.
