Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL – WIRING GUIDE
ON
1
2
3
4
5
1 2 4 8 16
Addr:
Connecting the N-MINI 2 Reader and DRB – Dip Switch
Addressing
Note: Please identify the PCB version of DRB board for correct Dip Switch Orientation
(refer page 6)
The dipswitch is used for setting the unit address of the DRB to match the RDK
Each switch is represent by an address, the sum of the switch address will be the
controller address
The number in RED color is the address of each individual switch of the dip switch
Example: To obtain Address 11, 1 + 2 + 8 = 11, So just switch on switch 1, 2, 4
Note: Factory Default Unit Address of NMINI2 Reader is 000
To configure the unit address of NMINI2, please go to:
System > System Setting > Unit Address
